Jewellery Making Starter Kit - Large

Jewellery Making Starter Kit - Large

Everything you need to get started with making jewellery!

with Jewellery Pliers, Bead Needles, Sharp Steel Scissors, Brass Assistant Tool, Tape Measure, Iron Ribbon Ends and more...

Size:

Pliers: crimp

Pliers: round nose

Pliers: flat nose

Pliers: wire cutter

Pliers: snipper

callipers: 105x44x5mm, 1pc;

Needles: 125x9.5mm, 1pc;

Needles: 146x12x3.5mm; Pin: 1mm, 1pc;

Scissors: 10.6x2.2x1cm, 1pc;

Shovel: 62x48x16mm, 1pc;

Guide Tool: 46x16x3mm, 3pcs;

Jump ring opener Tool: 18x7x1mm, 1pc;

Measure: 158x20mm, 1bundle;

Crystal Thread: 0.6mm; about 15m/roll, 1roll;

Needles: 80x0.45mm; about 30pcs/bag, 1bag;

Needles: 100x0.45; about 34pcs-38pcs/bag, 1bag;

Needles: 120x0.45; about 34pcs-38pcs/bag, 1bag;

Needles: 55x0.45mm; about 30pcs/bag, 1bag;

Lobster Claw Clasp: 14x8mm, Hole: 1.8mm, 20pcs;

Ribbon End: 13x7x5mm, hole: 2mm, 15pcs;

Ribbon End: 8x8x5mm, Hole: 2mm, 30pcs;

Jump Ring: 6x1mm, 4mm inner diameter, 10g;

Jump Ring: 8x1mm, 6mm inner diameter, 10g;

End Piece: 7x2.5mm, hole: 1.2mm, 10pcs;

Jump Ring: 4x0.8mm; 2.4mm inner diameter, 10g;

Jump Ring: 10x1mm, 8mm inner diameter, 10g;

Design Board: 33x24x1cm, 1pc;

Storage Case: 34.5x25x3cm, 1pc.

Priced per 1 Set